Softener Rejuvenation

Click here for printable instructions (requires adobe acrobat)

Instructions:

1. Attach a water hose between the water supply and the water softener.
2. Connect a second water hose onto the other side of the water softener.
3. Place open end of water hose in a bucket and slowly turn on the water.
4. Rinse (The resin in the softener has a stabilizer which requires rinsing). Turn on water (first gallon of water will likely be discolored and should clear up in a few seconds).
5. Once the water becomes clear it is ready for use and can be connected to your RV, Boat, Sprayer, etc..

Parts List:

Included Items

    1 - Water Softener
    1 - Female threaded 3/4" hose cap
    1 - Instruction Sheet

Optional Items:

Available for purchase online or from your reseller

• 4' White Water Hose
• Regeneration Packets (Iodized Table Salt)
• Mounting Brackets
• Annual Inspection (includes pressure check, rejuvenation flush and 30 day warranty

Softener Rejuvenation:

1: Cap
Install hose cap provided with Softener

2: Mix
1 part iodized salt (table salt)
4 parts water

3: Dissolve
Salt in water

4: Pour
Salt Water into Softener

5: Soak
Stand open end up in bucket and allow to soak for 60 minutes

6: Flush
Connect water hose and allow a gallon of water to flow through the softener

7: Enjoy
Your softener should be rejuvenated and ready for use.